| Customization: | Available |
|---|---|
| After-sales Service: | DIY, Stable Quality |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 13/Square Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GKBM NT-W2104L-13 Green Wear Resistant Kid Friendly Honolulu Oak Unilin Click SPC Wood Flooring
About SPC Flooring
The stone plastic composite (SPC) flooring, is a modern kind of high quality ground decoration material. The primary raw material of stone plastic composite flooring is organic stone powder. It does not consist any radioactive properties after being experimented by the national authoritative department. It is a renewable and environmental conservation ground decoration substances. Any qualified stone plastic composite flooring needs to undergone international certification of IS09000 for quality assurance and also the ISO14001 international green environmental protection certification.
Specifications
Manufacturer: GKBM
Brand: Greenpy
Series: NT Series Wood Grain Flooring
Decoration Film: Honolulu Oak
Product Name: Stone Plastic Composite Flooring (SPC Flooring)
Size: 7*48 inches, 12*24 inches
Click System: Unilin
Thickness: 4mm, 5mm, 5.5mm, 6mm
Wear Layer: 0.3mm, 0.4mm, 0.5mm, 0.6mm
Warranty: 20-30 Years
Packaging: Carton 13 pcs/carton; 2.9m2/carton
IXPE mute mat: optional
IXPE thickness: 1mm, 1.5mm, 2mm
Residual indentation: 0.15-0.4mm
Seam Strength: ≥1.5KN/M
Application:
Musical hall, post office, studio, museum, reading room, store room, media center, administrative office, entertaining room, recreation room, underground room, sport hall, health spa etc.
SPC Flooring DetailsInstallation Procedures
Installation Notes:
1.The temperature should be kept between 10-30 °C;
Place SPC floors at a constant temperature for 24 hours before paving; the humidity should be kept within 40%.
2. Basic ground requirements:
(1) The height difference within the 2m level shall not exceed 3mm, otherwise self-leveling cement construction is required to level the ground.
(2) If the ground is damaged, the width should not exceed 20cm and the depth should not exceed 5m, otherwise it needs to be filled.
(3) If there are protrusions on the ground, it must be smoothed with sandpaper or leveled with a ground leveler.
3. It is recommended to lay a silent pad (moisture-proof film, mulch film) with a thickness of less than 2mm first.
4. A minimum 10mm expansion joint must be reserved between the floor and the wall.
5. The maximum length of horizontal and vertical connection must be less than 10m, otherwise it must be cut off.
6. During the installation process, do not use a hammer to forcibly hit the floor to prevent damage to the floor slot (groove).
7. It is not recommended to install and lay it in places such as bathrooms and toilets that are soaked in water for a long time.
8. It is not recommended to lay in outdoor, open-air balcony sun room and other environments.
9. It is not recommended to lay it in places that are not used or inhabited for a long time.
Maintenance:
1. Use a professional floor-specific cleaner to clean up the floor dirt, and maintain it every 3-6 months.
2. Avoid scratching the floor with sharp objects, do not push or pull when placing furniture, you'd better put protection pads (covers) on the table and chair feet.
3. Avoid direct sunlight for a long time, and you can block the direct sunlight with curtains, glass heat insulation film, etc.
4. If exposed to a lot of water, please remove as soon as possible, and reduce the humidity to the normal range.
Paving Visual
Scene Mockup
GKBM Factory in Xi'An
Ordering Info
| Item | Code | Description |
| Model | NT-W2104L | |
| Color | 1 | See color card |
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | ||
| 7 | ||
| 8 | ||
| 9 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | ||
| 14 | ||
| 15 | ||
| Size | A | 183*1220mm (7*48") |
| B | 304.8*609.6mm (12*24") | |
| C | customized size | |
| Thickness | 40 | 4mm |
| 50 | 5mm | |
| 55 | 5.5mm | |
| 60 | 6mm | |
| Wear Layer | TH: | 0.3mm |
| FV: | 0.5mm | |
| SX: | 0.6mm | |
| IXPE (optional) | N | Without |
| W | With | |
| IXPE Thickness | 10 | 1mm |
| 15 | 1.5mm | |
| 20 | 2mm |
FAQ
1. How will you going to assure your product's quality?
Our products is well-guaranteed as it has been undergone Swiss SGS Test and China National Chemical Testing Center's Test. Also, we have won the prize of Quality Management Award of Shaanxi Province and Quality Management Award of Xi'An.
2. Is SPC flooring an eco-friendly product?
Yes, it is made up of recyclable materials which is environmental friendly.
3. How can I clean and maintain my SPC flooring?
The daily cleaning for SPC flooring is just simple, you may clean it with a broom or mop.
4. May I know the delivery period of the products?
The lead time is around 30 to 45 working days counting from the date of deposit payment received.
){kind=link}